MarCat

Barcode scanner and printer for a supermarket counter: what to buy and what to test

The scanner, bill printer, label printer and cash drawer a supermarket counter needs, how to choose each one, and a counter test to run before you pay.

By Swarbhanu Gupta, who has run Banjara supermarket in Ahmedabad since January 2025 (billing on MarCat since April 2026) · 15 November 2026

A supermarket counter is four pieces of hardware around one screen: a barcode scanner, a bill printer, a label printer for items without a usable barcode, and a cash drawer. Each one is cheap compared with what it costs you when it fails at 8 PM with a queue at the counter.

The hardware only works as well as the barcode billing software it runs with, so test the two together on your own packs.

This guide goes through each piece, what to look for, and a short test you can run with packs from your own shelf. No brands and no prices. Models change every year; the tests do not.

The counter kit at a glance

Piece What it does The choice that matters
Barcode scanner Reads the code on the pack into the bill 1D or 2D, wired or wireless, handheld or stand
Bill printer Prints the customer's bill Paper width (2 inch or 3 inch), how it connects
Label printer Prints barcode stickers for loose, repacked and unbarcoded items Label size, direct thermal or ribbon
Cash drawer Holds cash, opens when a bill is saved Opens from the printer or by key

If you bill from a phone as a second counter, the same list applies, just smaller: a phone, a small Bluetooth or USB printer, and either the camera or a compact scanner.

The barcode scanner

1D or 2D

  • 1D (linear) scanners read the line barcodes on packed goods (EAN-13 and similar). They are enough to bill packed items.
  • 2D (imager) scanners read line barcodes and QR codes. In practice they also read faded, crumpled, curved and shiny codes better, and you do not have to line the pack up as carefully.

On a quiet afternoon the difference is small. In the evening rush, a scanner that needs a second or third try on every chips packet slows the whole queue. If the price gap is small, take the 2D.

Wired, wireless, handheld or stand

Type Good for Watch out for
Wired handheld (USB) Main counter, most items Cable gets in the way of big items
Wireless handheld Heavy items in the trolley: atta bags, oil tins, water cans Charging; keep the base plugged in
Stand (hands-free) Fast counters with many small packs Big or heavy items still need lifting

A common setup is a stand or wired scanner for normal billing, plus permission to lift the scanner off the stand for a 10 kg bag.

Plug in and test

Most USB scanners type the code into the screen as if it came from a keyboard. Before buying, plug it in, open any text box, and scan. The code should appear in full and the cursor should move on (an Enter after the code). If the code comes up with a missing digit or an extra character, the scanner settings need changing before it goes near a bill.

The bill printer

Thermal bill printers use heat-sensitive paper and no ink. Two widths are common:

2 inch (58 mm) 3 inch (80 mm)
Size Small, often portable Standard counter size
Bill Long item names wrap, bill gets long Item, qty, rate, amount fit on one line
Common with Phones, small counters PC counters
Paper Small rolls, change more often Bigger rolls

For a supermarket main counter, 3 inch is the usual choice. The GST bill has to show item lines and tax, and a narrow roll makes a long bill harder to read for the customer and for you when you check a return later.

What to check:

  1. Connection. USB for a PC counter. Bluetooth or USB for a phone. Ask whether the printer works with the device and software you will use.
  2. Auto cutter. Saves seconds on every bill, which adds up in the rush.
  3. Paper. Buy a roll from your local supplier and try it in the printer. Thermal paper fades with heat and sunlight, so keep a copy of every bill in your billing system, not only on paper.

The label printer

Packed goods come with a barcode. Loose and repacked items do not: atta you pack in 1 kg bags, dry fruits weighed into pouches, a box of local namkeen with a code the scanner cannot read. For these, you print your own barcode stickers.

Choice What it means
Direct thermal No ribbon, cheaper to run, labels fade over months. Fine for fast-moving stock
Thermal transfer (ribbon) Lasts longer, costs more to run. Better for items that sit on the shelf
Label size 50 x 25 mm and 38 x 25 mm are common sizes for shelf items
Across Rolls come 1, 2 or 3 labels across. Your software has to print the same layout

Before buying, make sure the label size your software prints and the rolls you can buy locally are the same size. A label printer that only takes one hard-to-find roll size will stop the day your stock of rolls runs out.

The label on a repacked pack has its own legal side (MRP declaration, weight, packed date). That is covered in MRP sticker with barcode. A counter barcode label alone is not that declaration.

The cash drawer

Most cash drawers plug into the bill printer and open when the bill prints. Check that the printer has the drawer port, that the drawer opens by key when the power is off, and that it has slots for coins, ₹10 to ₹500 notes and a slot under the tray for cheques and slips.

A 15-minute test with your own shelf

Take this basket to the shop or the demo:

  1. A curved pack (shampoo bottle).
  2. A shiny pack (chips).
  3. A crumpled or scratched code.
  4. A code under shrink wrap (a multipack).
  5. A label you printed yourself last month.
  6. A 10 kg atta bag, for the wireless scanner.

Scan each one five times. Count the misses. Then print a 25-line bill and read it like a customer would. Then print ten labels and scan every one.

If a piece of hardware fails here, it will fail every day.

From our counter

We have run Banjara, our own supermarket in Ahmedabad, since January 2025. A few opinions from that counter:

  • Spend on the scanner first. A cashier forgives a slow screen. Nobody forgives a scanner that beeps twice and reads nothing, with ten people waiting.
  • Keep a spare of everything cheap. A spare scanner and a spare box of rolls cost little. A dead scanner on a Sunday evening costs a lot more.
  • Print and scan your own labels before you trust them. A label that looks fine can still be too small or too faint for the scanner.

Where software helps

Hardware only prints and reads. What makes it useful is the software behind it: the item list the scanner looks up, the bill layout the printer prints, and the labels you can print in bulk from your item list. When choosing hardware, check it with the software you will actually use, on the device you already have.

How MarCat handles it

We have run Banjara since January 2025, and it has billed on MarCat since April 2026. This is what MarCat does at the counter:

  • PC or phone. Bills from a PC counter or a phone, whichever the store already has, so there is no special billing machine to buy.
  • Scan and bill. Scan the barcode and the item, price and GST come up.
  • Several counters. Multiple counters bill at the same time and share one view of stock.
  • Barcode labels. Pick items and print labels with item name, barcode and selling price on 50 x 30 mm or 50 x 25 mm rolls (2 across), 38 x 25 mm rolls (3 across), or A4 sheets. Labels print for items that already have a barcode in the item list.

If you want to check your scanner and printer with MarCat before you buy anything new, message us on WhatsApp at +91 96787 65518.

Questions

Do I need a 1D or a 2D barcode scanner for a supermarket?
A 1D scanner reads the line barcodes printed on packs. A 2D scanner reads those and also QR codes, and it is usually more forgiving with damaged, curved or shiny codes. If the price gap is small, a 2D scanner is the safer buy for a busy counter.
Should the bill printer be 2 inch or 3 inch?
A 3 inch (80 mm) thermal printer fits a full GST bill with item name, quantity, rate and tax more comfortably. A 2 inch (58 mm) printer is smaller and common with phones, but long item names wrap and the bill gets long.
Is a bill printer the same as a barcode label printer?
No. A bill printer prints receipts on a continuous roll. A label printer prints on sticker rolls of a fixed size, used for loose, repacked or unbarcoded items. Most stores need both.
What should I test before buying a scanner?
Scan a curved pack, a shiny pack, a crumpled code, a code under shrink wrap and a label you printed yourself. Count how many need a second try. That number matters more than the speed in the brochure.
Does MarCat need special hardware?
No special billing machine. MarCat bills from a PC counter or a phone, whichever the store already has, and prints barcode labels on common label roll sizes. Message us on WhatsApp at +91 96787 65518 to check your setup.