MarCat

Billing loose items by weight: atta, dal and sugar at the supermarket counter

Loose atta, dal and sugar cause more billing mistakes than packed items. How to set up loose items, enter weights right, and keep stock true.

By Swarbhanu Gupta, who has run Banjara supermarket in Ahmedabad since January 2025 (billing on MarCat since April 2026) · 10 November 2026

Packed goods are easy at the counter. Scan the barcode, the price comes up, done. Loose goods are where the mistakes hide. Atta, dal, rice, sugar, poha, dry fruits, spices sold from the bin: each one needs a weight, a unit and a rate, and each one can go wrong in a way that nobody notices until the stock does not match.

A loose item is anything sold by weight or measure from a sack or tin, like atta, dal, sugar or rice, instead of in a sealed barcoded pack. Its loose price is the store's rate per kg (or per litre), and the bill is that rate times the weight. Supermarket billing software should take decimal quantities like 0.75 kg at the counter.

This guide is about setting up loose items so they bill right on a busy evening, and so your stock stays true.

Why loose items go wrong

Most loose-item mistakes come from three places:

  1. The item is set up like a packed item. The software expects whole numbers, so the cashier types 1 for half a kilo, or rounds 0.75 up to 1.
  2. The unit is not clear. One cashier types 500 meaning grams, another types 0.5 meaning kg, for the same item. One of those bills is a thousand times off.
  3. Loose and sealed are mixed. The sealed 1 kg atta bag and loose atta share one item, so the stock count is a mix of bags and kilos that means nothing.

None of these show up on a single bill. They show up a month later, when loose dal says 40 kg in stock and the bin is empty.

Set up every loose item properly

Before you think about the counter, fix the item list. For every loose item, decide three things.

1. One unit, written down. For most groceries, kg is the simplest. Spices and dry fruits sold in small amounts can be in g if your cashiers find that easier. What matters is that each item has one unit and everyone knows it.

2. Decimals allowed. A loose item must accept 0.25, 0.5, 1.75. A sealed pack must not. If your software lets one setting decide this for each item, use it.

3. Loose and sealed are separate items. Even when it is the same atta from the same mill.

Item Unit Sells in decimals Example bill line
Atta, loose kg Yes 2.5 kg × ₹40 = ₹100
Atta, sealed 1 kg bag pcs No 1 pcs × ₹50 = ₹50
Toor dal, loose kg Yes 0.5 kg × ₹160 = ₹80
Jeera, loose g Yes 100 g × ₹0.60 = ₹60

(Example prices only.)

Notice the jeera row. If you keep a spice in grams, the rate is per gram, and that small rate looks odd on screen. Many stores keep everything in kg for this reason and enter 0.1 for 100 g. Either works. Mixing does not.

Also set the GST on each loose item as your accountant advises. Do not just copy it from the sealed version of the same product without checking.

Get the weight right before the counter

The counter is the worst place to weigh. The queue is waiting, the customer is watching, and the cashier is doing two jobs.

  • Keep a scale at the loose section. A helper weighs and bags the item there, and writes the weight on the bag or a slip. The cashier only reads and types.
  • Write the weight the way it will be typed. If the item is in kg, the slip says 0.5, not 500 g. This removes the conversion from the cashier's head.
  • Use whole steps where you can. 250 g, 500 g, 1 kg cover most orders. Odd weights like 0.37 kg are fine when the customer asks, but they are where typing mistakes happen.

Your scale itself has a rule. Under the Legal Metrology Act, 2009, any weighing scale used to sell goods by weight has to be verified and stamped by the legal metrology department before use, and re-verified when it falls due. Keep the verification certificate safe and note the due date somewhere you will see it.

Cashier checks that catch most mistakes

Teach these once, and repeat them when someone new joins the counter.

  • Read the quantity back from the screen, not from your head. After typing, look at the bill line. Does it say 0.5 kg, or 5 kg?
  • Check the amount makes sense. Half a kilo of dal should not cost more than a sealed 1 kg bag. If a line amount looks too big or too small, it usually is.
  • Never use quantity 1 as a shortcut. "I'll just put 1 and change the rate" breaks your stock and your reports.
  • Ask when the slip is unclear. A smudged 0.8 or 0.3 is worth a five-second question.

A simple wall card at each counter helps:

Slip says Type
250 g 0.25
500 g 0.5
750 g 0.75
1 kg 200 g 1.2

Paise and rounding

Loose items create paise. 0.35 kg at ₹48 is ₹16.80. Decide how your store treats the paise on the final bill and keep it the same for every customer and every counter. Do not let each cashier decide on the spot. If your accountant has a view on how round-off should show in your reports, follow it.

Keep loose stock honest

Loose stock drifts more than packed stock. There is spillage, moisture loss, and the bit that sticks to the scoop. That is normal. What you want is to know how much drift is normal for your store, so you notice when it is not.

  • Enter purchases in the same unit you sell in. If you buy toor dal in 30 kg bags and sell by the kg, enter the purchase as 30 kg per bag, not as 1 bag.
  • Count your loose items more often than packed ones. A quick weekly weigh of the main bins (atta, sugar, rice, two or three dals) is enough.
  • Compare system stock with the bin. A small gap is wastage. A big gap is often a unit mistake at the counter or at purchase entry. Look for bills with quantities like 500 on a kg item before you suspect anything else.

How MarCat handles it

We have run Banjara, our own supermarket in Ahmedabad, since January 2025, and it has billed on MarCat since April 2026. Loose items are part of every day at our counter. This is how MarCat handles them:

  • A loose-item setting on every item. Each item has a "sells in decimals (loose item)" setting, separate from its unit. Loose atta by the kg takes 0.5 or 2.25. The sealed 1 kg atta bag stays a whole-number item with its own barcode.
  • Billed straight from the counter. Decimal quantities like 0.5 kg of dal go on the bill like any other item, from a PC counter or a phone.
  • Stock moves with every bill. Every sale and every purchase moves stock automatically, so the loose stock in the system follows what actually went out of the bin.

If you sell loose staples and want to see this on a real counter, message us on WhatsApp at +91 96787 65518.

Questions

Should loose atta and a sealed 1 kg atta bag be the same item?
No. Keep them as two separate items. The sealed bag is sold by the piece with its own barcode and MRP. Loose atta is sold by weight, in decimals of a kg.
Should I enter 500 g as 0.5 or as 500?
It depends on the unit set for the item. If the unit is kg, enter 0.5. If the unit is g, enter 500. Pick one unit per item and train every cashier on it.
Does my weighing scale need to be verified?
Yes. Under the Legal Metrology Act, 2009, a scale used to sell goods by weight has to be verified and stamped before use, and re-verified when it falls due.
Can MarCat bill loose items in decimals?
Yes. Each item in MarCat has a 'sells in decimals (loose item)' setting, separate from its unit, so 0.5 kg of dal is billed straight from the counter.