Every supermarket owner meets this problem sooner or later. A brand raises the price of a biscuit or a detergent. The new cartons arrive with the new MRP printed on them. But the shelf still has packs with the old MRP, and both carry the same barcode.
Good supermarket billing software shows both prices at the counter, so the cashier picks the one printed on the pack.
The cashier scans the barcode. Which price should come up?
If your billing software only knows one MRP per barcode, it will get it wrong for some of the packs. This guide explains what the rule is, what goes wrong in practice, and how to set up your billing so each pack is sold at the price printed on it.
The rule: bill the price printed on the pack
In India, the MRP printed on a packaged product is the maximum price at which it can be sold. Under the Legal Metrology (Packaged Commodities) Rules, you cannot charge a customer more than the MRP printed on the pack in their hand, and a store cannot put a higher MRP sticker on old stock itself.
So when the MRP goes up:
- Old packs must still be sold at the old MRP (or less), unless the brand itself has officially re-labelled them.
- New packs can be sold at the new MRP (or less).
Both can be on the shelf at the same time, sometimes for weeks.
When the MRP goes down, the picture flips. Customers will expect the lower price, and many stores choose to sell the old stock at the new lower price to avoid arguments at the counter. That is a margin decision for you to make, but your software should let you make it.
What goes wrong at the counter
When billing software keeps only one MRP for each item, one of these happens:
- Someone updates the MRP when the new stock arrives. Now every old pack scanned rings up at the higher price. A customer who reads the pack will notice, and you are overcharging, which is both a legal risk and a trust problem.
- Nobody updates it. New packs ring up at the old, lower price. You lose the margin the price increase was supposed to give you, quietly, on every bill.
- The cashier overrides the price by hand. This works on a quiet afternoon. In the evening rush, with a queue at the counter, it gets skipped or mistyped. Manual price edits also make your sales reports harder to trust.
There is also a stock problem. If both MRPs live under one item, your stock count is one mixed number. You cannot see how many old packs are left, so you do not know when it is safe to stop selling at the old price.
The fix: treat each MRP as its own stock line
The clean way to handle this is to keep one stock line per MRP, even though they share a barcode:
| Item | Barcode | MRP | Stock |
|---|---|---|---|
| Biscuit 200 g | 8901234567890 | ₹30 | 14 packs (old) |
| Biscuit 200 g | 8901234567890 | ₹35 | 48 packs (new) |
Then three things fall into place:
- At purchase entry, when the supplier bill shows a new MRP, the new stock goes into the new line. The old line keeps its own stock and its own price.
- At the counter, scanning the barcode finds both lines. The cashier looks at the pack and picks the matching MRP.
- In your stock reports, you can see exactly how many old packs remain, so you know when the old price is finished.
Tips that help at the counter
- Shelve old stock in front. First in, first out also means old MRP out first. Fewer days with both prices on the shelf.
- Tell your cashiers what to look for. A quick "check the MRP on the pack when the screen shows two prices" saves most mistakes.
- Do not delete the old line early. Wait until its stock is truly zero, including the store room.
- Check your margin on the new MRP. A higher MRP often comes with a higher purchase rate too. Make sure the selling price on the new line still leaves you the margin you expect.
How MarCat handles it
We have run Banjara, our own supermarket in Ahmedabad, since January 2025, and it has billed on MarCat since April 2026. MRP changes are something we deal with at our own counter all the time. So this is how it works in MarCat:
- Every MRP change asks you first. When a new MRP comes in, at purchase entry or when you edit an item, MarCat asks whether to keep both prices or replace the old one. Keep both, and the old stock stays sellable at its old MRP while the new stock goes in at the new MRP.
- Scanning shows both. When one barcode has two MRPs, the counter shows each one with its stock and selling price. The cashier picks the one printed on the pack, with the arrow keys or a number key, without leaving the bill.
- Stock stays separate. Each MRP has its own stock, so you can see when the old packs are finished.
If you already use other software and want to see how this works on a real counter, message us on WhatsApp at +91 96787 65518.
