Every neighbourhood supermarket has one stretch of the day that decides how customers feel about it. For most of us it is the evening, roughly between 7 and 9 PM, when people come back from work and stop for milk, bread, atta and whatever was forgotten in the morning.
The rest of the day forgives a slow bill. The evening does not. A customer who waits behind three trolleys at 3 PM shrugs. The same customer at 8 PM, with two items and a tired child, puts the basket down and leaves.
We have run Banjara, our own supermarket in Ahmedabad, since January 2025, and it has billed on MarCat since April 2026. These are the things the evening counter taught us, first on other software and then on our own.
Scanning is not what makes a bill slow
When the queue grows, the first instinct is "the cashier is slow". Watch the counter for one evening and you will usually find that scanning is the fast part. A packed item scans in a second.
What eats the time is the exception: the one item in the basket that does not behave like the others.
| What stops the bill | What the cashier does | What fixes it before the rush |
|---|---|---|
| Barcode will not scan (curved pack, torn label) | Types the code, or searches the item list | A printed list of problem items with their codes at the counter |
| Item not in the system at all | Calls someone, or guesses a price | New stock entered at purchase, not when the customer is waiting |
| Loose atta or dal brought unweighed | Weighs it at the till | Weigh and sticker loose items at the loose section |
| Same barcode, two MRPs | Checks the pack, picks the price | Old MRP stock shelved in front, cashier told what to look for |
| Customer disputes a price | Walks to the shelf | Shelf labels checked against billing before the rush |
| ₹500 note for a ₹62 bill | Hunts for change | Change counted into the drawer before 7 PM |
| UPI payment "not received yet" | Waits, refreshes | A clear rule for when a payment counts as received |
| Khata customer asks their balance | Looks it up, argues | Khata customers told their balance when they ask, not debated at the till |
One exception in a bill costs more time than twenty scans. Five exceptions in an evening queue is how a two-minute wait turns into ten.
The 30 minutes before the rush
Most exceptions can be removed in the quiet hour before. A simple checklist, done every day at the same time, works better than any speech to the staff.
- Change. Count small notes and coins into each drawer. Write down what was added.
- Paper and power. A fresh bill roll in the printer, a spare roll within reach, scanner and printer tested with one real bill.
- Today's price changes. Any selling price changed today: scan that item at every counter and check the price that comes up.
- Loose items. Weigh the common sizes of atta, sugar, dal and rice into packs (1 kg, 500 g) and sticker them, so the cashier only scans.
- New stock. Anything that came in today is in the item list with its barcode and price, not lying in a carton waiting to be entered.
- Shelf labels. Walk the fast-moving aisles and check that the price on the shelf matches the price at the counter.
- A second pair of hands. Decide who leaves the shelves to pack bags or open a second counter when the queue passes a set length.
It is boring work. That is the point. The rush is not the time to discover that the printer is out of paper.
Counter habits that keep the queue moving
- Scan first, talk later. The cashier starts scanning while the customer is still unloading the basket. Questions about schemes or new products wait until the bill is done.
- Park the problem, not the queue. If one item cannot be found or priced in a few seconds, put it to one side, finish the rest of the bill, take payment, and then sort out the one item. The customers behind should not wait for it.
- Bag while scanning. If a second person can pack, the cashier never has to stop. If not, scan heavy and hard items first so soft items go on top.
- Say the total before the customer asks. It sounds small. It saves the "how much?" back and forth on every bill.
- One cashier, one drawer. Nobody else takes cash from that drawer or gives change from it during the rush.
- Fix bills after the rush, not during. A wrong quantity on the last bill can be corrected later, with a reason. Stopping the queue to argue over it costs more.
Know when your rush really is
"Evenings are busy" is true for most stores, but the exact hour differs. Near offices it can start at 6. In a residential lane it can run past 9. On weekends and before festivals it moves again.
Do not plan staff on a feeling. Look at your bills by hour for a few weeks:
| Hour (made-up example) | Bills | Average bill |
|---|---|---|
| 5-6 PM | 30 | ₹350 |
| 6-7 PM | 45 | ₹300 |
| 7-8 PM | 80 | ₹250 |
| 8-9 PM | 70 | ₹280 |
| 9-10 PM | 25 | ₹400 |
In this example the peak is 7-9 PM, and the bills are smaller then: many people buying a few things. That is the case for an express counter or a second cashier for those two hours only. How to set up a second counter on the same stock is in our multiple billing counters guide.
From our counter
A few opinions, from running the counter at our own store:
- Design billing software for 8 PM, not for a demo. On a quiet screen almost any software looks fine. The real test is a cashier billing with a queue in front, a scanner that missed, and a customer asking about udhaar at the same time. Every extra click or popup is multiplied by every bill in that hour.
- The keyboard beats the mouse at the till. When a cashier has to reach for a mouse to pick an MRP or a quantity, the bill slows down. Arrow keys, number keys and Enter keep the hands where they are.
- A slow software screen is a staff problem too. Cashiers learn to work around a slow screen by typing prices by hand. That is where wrong bills and stock gaps come from.
- Most of the rush is won in the afternoon. Weighing loose items, entering new stock and checking prices before 7 PM does more for the queue than any counter trick during it.
Where software helps
Software cannot count change or weigh dal. What it can do is make the normal bill fast, keep every counter on the same prices and stock, handle the awkward items (loose, two MRPs) without leaving the bill, and show you, hour by hour, when your rush really is.
How MarCat handles it
These are the parts of MarCat that matter most in the evening rush:
- Scan and bill. Scan the barcode and the item, price and GST come up. Bill from a PC counter or a phone, whichever the store already has.
- Two MRPs without leaving the bill. When one barcode has more than one MRP, scanning shows each MRP with its stock and selling price, and the cashier picks the one on the pack with the arrow keys and Enter or a number key.
- Loose items. Each item has a "sells in decimals (loose item)" setting, so 0.5 kg of dal bills straight from the counter, while a sealed 1 kg atta bag scans like any pack.
- More than one counter. Multiple counters bill at the same time and share one view of stock, with shifts opened and closed and a day-end report for each shift.
- See your peak hour. The hourly sales heatmap shows the peak hour, bills and average bill by hour, and day-of-week sales.
If you want to see how a bill runs on a real counter, message us on WhatsApp at +91 96787 65518.
