MarCat

Before the shutter opens: the first hour that decides a supermarket's day

What a supermarket owner checks before the first bill: yesterday's cash and edited bills, goods received, price changes, loose packs and the counters.

By Swarbhanu Gupta, who has run Banjara supermarket in Ahmedabad since January 2025 (billing on MarCat since April 2026) · 22 November 2026

The customer sees a supermarket from the moment the shutter goes up. The owner sees it from about an hour before that.

We have run Banjara, our own supermarket in Ahmedabad, since January 2025, and it has billed on MarCat since April 2026. Over that time we learnt that much of what goes wrong at 8 PM was decided at 8 AM. A price nobody loaded. A carton that came in last night and is sitting on the shelf but not in the system. A cash gap from yesterday that nobody looked at, so it happens again today.

This is the hour before customers, as we think it should run. It is not a fancy routine. It is a short list done in the same order every day.

Why the order matters

The first hour has two kinds of work: looking back at yesterday, and getting ready for today. Do the looking back first. If yesterday's drawer was short, or a bill was cancelled without a clear reason, you want to know before the same cashier opens the same counter.

Time before opening What Who
60 minutes Yesterday's cash against the bills Owner or manager
50 minutes Yesterday's edited and cancelled bills Owner or manager
40 minutes Goods received since the last close Whoever does purchase entry
30 minutes Today's price changes, loaded and checked One fixed person
20 minutes Loose items weighed and stickered Floor staff
10 minutes Counters: change, bill roll, scanner, test print Each cashier

The times are an example. A small store may do all of it in 30 minutes with two people. The order is the part to keep.

1. Yesterday's cash, against the bills

Close of day is the worst time to chase a cash difference. Everyone wants to go home, and "we will see tomorrow" quietly becomes "we never saw".

In the morning, with a cup of tea and no queue, compare what each counter's drawer held at close with what its bills say it should have held. Look at each counter and each shift separately. A total for the whole store hides which drawer was off.

If there is a gap, do not start with the cashier. Start with the boring causes: a UPI payment marked as cash, a cancelled bill whose money was already returned, opening change that was not counted. Our daily sales report format guide has a simple cash tally sheet for this.

2. Yesterday's edited and cancelled bills

Every store edits bills. A wrong quantity, the wrong payment mode, an item scanned twice. That is normal. What is not normal is an edit nobody can explain.

Ten minutes is enough. Go through the bills that were changed or cancelled yesterday and ask three questions for each:

  1. Who changed it, and when?
  2. What changed: item, quantity, price or payment mode?
  3. Is there a reason a second person would accept?

The person who made the edit is often back on shift in the morning, so you can ask while it is fresh. Our guide on editing a bill after saving explains edit vs cancel vs return, and why every change needs a trail.

3. Goods received since the last close

Distributor vans do not keep office hours. Goods arrive in the afternoon rush, at closing time, sometimes after the shutter is half down. If those cartons go to the shelf before the supplier bill is entered, three things go wrong together: stock is short in the system, a new item may not scan at all, and a changed MRP or purchase rate is missed.

Before opening, check:

  • Every supplier bill received since yesterday is entered, with the free goods and schemes on it.
  • Any new item on those bills is in the item list with its barcode and selling price.
  • Any item whose MRP changed on this bill is handled: is the old stock still on the shelf at the old MRP?
  • Nothing from those cartons is on the shelf yet if it is not in the system.

The last point is the one that saves the evening. An item on the shelf that the system does not know is how a cashier ends up searching the item list with five people waiting.

4. Today's price changes

Prices change for many reasons: a new MRP, a purchase rate that moved, a scheme that ended. Whatever the reason, change them at one fixed time, before the first bill, by one fixed person.

Then check them where it matters. Scan each changed item at every counter and see the new price come up. Fix the shelf label in the same round. A price that is right at counter 1 and old at counter 2 is worse than no change at all, because now two customers paid two prices for the same pack.

The full routine, with a price change log, is in our price change on every counter guide.

5. Loose items, ready before anyone asks

Atta, sugar, dal, rice and other loose staples are where the counter loses the most time. A customer who brings an unweighed bag to the till holds up everyone behind them.

The morning hour is the quiet time to weigh the common sizes (1 kg, 500 g, 250 g, whatever your customers buy most) into packs and sticker them. The cashier then only scans. Leave the scoop and scale at the loose section for the odd sizes, but make the common sizes ready.

6. The counters themselves

The last ten minutes belong to each cashier at their own counter:

  • Change counted into the drawer, and the opening amount written down.
  • A fresh bill roll in the printer and one spare within reach.
  • Scanner tested on a few packs, including one curved or shiny pack that often fails.
  • One test print from the printer, so a jammed roll shows up now and not on the first customer's bill.

It sounds too simple to write down. It is also the list that most often gets skipped, until the printer runs out of paper on the first big bill of the day.

From our counter

A few opinions, from running our own store:

  • Look back before you look forward. Yesterday's cash and edited bills are the only part of the morning that tells you something you did not know. Everything else is preparation.
  • The owner's hour is not a stock-taking hour. A full stock count does not fit before opening. The morning is for checks that take minutes. Counting is a separate job, done section by section on a fixed day.
  • Write the list, then stop thinking about it. A printed checklist on the wall, ticked every day, works better than an owner who remembers some days. Staff follow what is written and checked, not what is said once.
  • The evening rush is won here. Every exception you clear in the morning (a price, a new item, a loose pack) is one less reason for the queue to stop at 8 PM. We wrote about that side of the day in the evening rush.
  • Software should make the morning shorter, not longer. If yesterday's cash, edits and stock take an hour to dig out of reports, the owner will stop looking. The numbers have to be on one screen.

Where software helps

No software weighs dal or opens the shutter. What it can do is put yesterday's cash, edited bills and goods received in front of you in a few minutes, make a price change reach every counter at once, and keep stock right so the evening counter does not stop on an unknown item.

How MarCat handles it

The parts of MarCat that matter in the first hour:

  • Shifts and drawer cash. Each cashier opens and closes a shift. The shift Z-report shows the opening float and the expected drawer cash against the closing cash count, and Cash Audit lets you count the drawer and reconcile it.
  • Edited and cancelled bills. Bills can be edited after saving, and every change is kept in an audit trail. The Profit Leaks report lists discounts, items sold below cost, cancelled bills and stock adjustments.
  • Purchase entry. Purchase entry follows how a supplier bill actually arrives, and every purchase moves stock automatically, with batch, MRP and cost.
  • MRP changes. Every MRP change asks whether to keep both prices or replace. Keep both, and old stock stays sellable at the old MRP while new stock goes in at the new MRP.
  • One stock for every counter. Multiple counters bill at the same time and share one view of stock.

If you want to see how this looks on a real counter, message us on WhatsApp at +91 96787 65518.

Questions

What should a supermarket owner check before opening the store?
Five things, in this order: yesterday's cash against the bills, any bills edited or cancelled yesterday, goods received since the last close, selling prices that change today, and the counters themselves (change, bill roll, scanner and a test print). Loose items that sell in fixed sizes can be weighed and stickered in the same hour.
Why check yesterday's edited bills in the morning and not at night?
At closing time everyone is tired and wants to leave. In the morning the person who made the edit is usually back on shift, the reason is still fresh, and a wrong edit can be fixed before the day's bills pile on top of it.
When should a store load price changes?
Before the first bill of the day, at a fixed time, and then scan the changed items at every counter. A price changed at 11 AM in the middle of billing means some customers paid the old price and some the new one.
Should goods received in the evening be entered the same night?
If possible, yes. If not, they should be entered first thing in the morning, before those items reach the shelf. An item on the shelf that is not yet in the system is how the evening queue stops.